Posted on: November 12, 2019 Posted by: admin Comments: 0


Doing so will damage the motherboard! Rotate each fastener counterclockwise. Select [System] to require the password before entering the system. Page 38 – Front panel audio connector pin FP Refer to the tables on the next page. Product warranty or service will not be extended if:

Uploader: Dijinn
Date Added: 19 February 2018
File Size: 18.43 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 98958
Price: Free* [*Free Regsitration Required]

The utility copies the current BIOS file to the floppy disk. Disconnect the CPU fan cable from the connector on the motherboard. System Memory Frequency Controls the system memory frequency. Remove the heatsink and fan assembly from the motherboard.

Enjoy stable system and data backup security

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Align the card connector with the slot and press firmly until the card is completely seated on the slot. It includes description of the jumpers and connectors on the motherboard. The keys in the legend bar allow you to navigate through the various setup menus.


Refer to the tables on the next page. Plug the power cord and turn ON the computer. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration. This 9-pin COM1 port is for pointing devices or other serial devices. Table Of Contents Contents Notices This 9-pin COM1 port is for pointing devices or other serial devices.

This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.

Use the navigation keys to select items in the menu and change the settings. Doing so will damage the motherboard! Systembuilder websites The systembuilder website provides updated information on the hardware and software products.


Comments to this Manuals Your Name. Assign an IRQ to the card. The signal is then generated as a chassis intrusion event. Page 16 Press the load lever with your thumb A and move it to the left B until it is released from the retention tab.


See page for details. Select [Ignored] if you do not wish to display the detected temperatures.

B The CPU fits in only one correct orientation. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Ausio Displays the auto-detected hard disk capacity. You cannot select an item that is not user-configurable. Removing the cap will cause system boot failure!

To change the supervisor password, follow the same steps as in setting a user password.

Page 42 Chapter 1: Contact a qualified service technician or your retailer. Connect one end of the chassis intrusion sensor or switch cable to this connector. Chapters Table Of Contents Allows you to enable or disable the full screen logo display feature.


Leave a Comment